What is the reason for the roller granulator stick roll in organic fertilizer equipment
1. material moisture: the fertilizer roller press granulator is widely used for raw materials, generally divided into two situations, the material itself has the aggregate, even if it does not contain water can be. If the material is not aggregates, it is generally taken to add 1-10% moisture to help better pellet. The solution is to judge the aggregates of the material to adjust the water, the smaller the aggregates, the more water is needed.
2. Mold adjustment: Generally, the newly purchased mold of the roller extrusion granulator is well adjusted, and there will be no big problems. It is often in the process of use or after the mold is replaced, the mold status changes, which will cause the problem of sticking sticks or not granulating. At this time, the problem can be solved by checking whether the mold gap is between 0.5-1mm and whether the pits of the two sticks are symmetrical
3. mold smoothness: in the production of roll mold, the smoothness of the surface of the mold will directly affect the release effect of the material. If the material is not good, or the surface has not been professionally polished and ground, it is also one of the reasons for the stick. The problem can be solved by polishing or grinding pits.
Our company has complete organic fertilizer equipment, with high quality organic fertilizer granulator mahine, we always adhere to high quality, high standard of product requirements, and constantly improve product quality, standing in the forefront of the domestic fertilizer equipment industry. Inquiry It Now!
