Will organic fertilizers cause corrosion to compost turning machine?
2022/10/27
Whether the materials in the organic fertilizer production cause corrosion to the organic fertilizer compost turning machine equipment is a concern of many customers. If the material causes corrosion to the machine, it will shorten the service life of the turning machine equipment and increase the production cost of organic fertilizer, which is not cost-effective for the enterprise.
The organic fertilizer machine manufacturers clearly tells you here that the production of organic fertilizer will not cause corrosion to the turning machine. If it is not used for a long time, the equipment needs to be thoroughly cleaned, otherwise it will cause equipment corrosion. This is because if it is not used for a long time, the residues in the machine will combine with the water in the air to form a large amount of moisture, and prolonged contact with the machine will cause corrosion of the contact parts, but it will not cause this in the normal production cycle. a phenomenon.
Ordinary organic fertilizer raw materials will not cause corrosion to the organic fertilizer equipment in the fertilizer production line. If some customers have requirements for equipment and materials, we can also customize according to customers' requirements. However, if you choose stainless steel to make an organic fertilizer turning machine, the cost will be much more expensive than ordinary equipment. Common wood slag is the waste of log processing, and it is also an excellent material for making organic fertilizers. The operation method of making wood chips and wood residues into organic fertilizers with fertilizer starter is as follows: adjust the water, build up the pile and turn it over. After the first stacking, the temperature reaches a high temperature above 60 °C again, and the second stacking is carried out. During the stacking process, local dry materials are found, and water is sprayed until the appropriate moisture content. Third, fourth stack and second stack. Then enter the wood residue alcohol stage, the temperature is 45 ℃ - 50 ℃, in this stage, the fermentation stack can be turned over 1-2 times as needed until the fermentation process is over.
