How does the fertilizer granulator extend its service life?
2019/10/31
Fertilizer granulator machines are essential in fertilizer manufacturing process, so maintaining and extending the life of the granulator is important for fertilizer production line and good economics. Here we look at some granulator operation notes:
1. When the fuselage is unstable, check whether the connection between the couplings is too tight. If it is too tight, it should be properly loosened in time.
2. Find out the operating rules of the equipment, the temperature of the fuselage is high and low, the speed is fast and slow, and it can be processed in time according to the situation.
3. If there is noise in the bearing parts at both ends of the bearing chamber of the main engine, it is necessary to stop the maintenance and add butter.
4. When the bearing parts of the reducer are burnt or have noise, they should be repaired and greased in time.
Ways to extend the service life of organic fertilizer granulator machine:
1. The operator should pay attention to regularly check the parts of the composition that are subject to wear and tear, and observe whether the degree of wear is not serious or serious. If it belongs to the latter, it should be replaced immediately to prevent accidents caused by persistent use.
2. For the plane of the undercarriage of the mobile device, it is necessary to pay attention to maintain hygiene and timely remove dust and other materials, so as to prevent the movable bearing from moving smoothly on the chassis when the equipment encounters unbreakable materials, resulting in serious accidents.
3. During the operation of organic fertilizer equipment, it is found that some newly installed tires are very prone to loosening, so it is necessary to check frequently. Also, if the bearing oil temperature rises too fast, or the rotating gear has abnormal impact sound, Should immediately stop power off, check the cause and then specifically solve.
4. Good lubricating oil has a great help to the bearing life. Therefore, the operator should ensure that the injected lubricating oil is clean and has good sealing performance.
