When organic fertilizer equipment suddenly stops operating, it should be handled according to the following steps:
1. Immediate stop check: If the equipment suddenly stops operation, press the emergency stop button immediately to cut off the power supply to ensure the safety of the operator and the equipment. Check whether the device has obvious abnormal conditions, such as odor, smoke, and abnormal noise, which may be the direct cause of the device fault.
2. Check the power supply and electrical system: Check whether the power supply is properly connected to the device and ensure that the power cable is not loose or damaged. Check whether electrical components such as motors, switches and circuits work properly and eliminate electrical faults.
3. Check the mechanical parts of the equipment: check the mechanical parts of the equipment, such as bearings, gears, belts, etc., for wear, loosening or damage. Check the lubrication system of the equipment to ensure that the lubricating oil or grease is sufficient and not spoiled.
4. Check the material and feed system: check whether there is blockage or material accumulation at the feed port, and clean up the blockage. Check the operation of the feeding system to ensure that the material can enter the equipment evenly and stably.
5. Check the safety device: ensure that the safety protection device of the equipment, such as guardrail, emergency stop button, etc., is in good condition and normal function.
6. Contact professional maintenance personnel: If the initial inspection cannot determine the cause of the failure, professional maintenance personnel should be immediately contacted for inspection and maintenance.
Through the above steps, we can effectively deal with the sudden stop of operation of organic fertilizer equipment, reduce the impact of equipment failure, and ensure the smooth progress of the production process of organic fertilizer production line.
