1, keep the work site clean, each time the organic fertilizer granulator ttest should be completely removed granulation leaves and granulation pot inside and outside the residual glue sand, clean scattered or splashed on the organic fertilizer equipment and flying objects, the organic fertilizer production line machine exposed to the outside of the processing surface wipe clean, coated with anti-rust meat paint, set on the corresponding protective cover, to prevent dust secondary intrusion.
2, organic fertilizer equipment without external refueling holes, gear, worm gear are lubricated with special butter for organic fertilizer equipment. The upper gear and the lower gear should be added once a season, and the moving gear box cover and the transmission gear cover can be opened respectively when refueling. The sliding surface between the support gear box and the hinge of the support should be lubricated with oil frequently. The worm gear case and bearing are equipped with sufficient transmission butter before delivery, but the transmission machine should be thoroughly cleaned and all protective lubricants replaced after one year of use.
3, often pay attention to the operation of organic fertilizer equipment, there should be no serious abnormal noise, but also should not be metal friction sound, if found abnormal, should immediately stop the use, check, troubleshoot before use, can not detect the corresponding cause, can not start the machine. If there is metal friction sound, you can check the gap between the organic fertilizer equipment.
4, often check the standard gap between organic fertilizer equipment.
5, when the maintenance of organic fertilizer equipment, each time should be re-determined the working gap, and adjusted several times, in line with the standard can continue to use.
