To solve the high temperature problem in the production of organic fertilizer equipment, the following measures can be taken:
1. Adjust the feeding amount of the dryer: if the firing temperature becomes low, the feeding amount of the dryer should be adjusted to reduce the material, and the reduction amplitude is based on the predicted temperature may be reduced.
2. Control heat source: When the firing temperature becomes high, and the feeding amount is already at a high level, first reduce coal, the reduction depends on the degree of industrial dryer temperature has been increased, and do not rush to add material.
3. Sealing control: the organic fertilizer dryer is partially sealed or integral sealed, and the dust producing point is sealed with a sealing cover to reduce material scattering and dust, so as to control heat loss.
4. Eliminate the height potential energy difference: reduce the dust spillover caused by the powder drop, should minimize the drop, reduce the inclination of the chute chute.
5. The use of exhaust system: Through the exhaust system to remove indoor dust and exhaust gas, reduce pollution and heat loss.
6. Thermal insulation measures: Strengthen thermal insulation, add thermal insulation layer such as glass wool on the steel plate, reduce the number of doors and reduce heat loss.
7. Temperature control: In the production process, the material needs to be heated, according to the characteristics of the material itself, the equipment is heated to different temperatures, and the equipment is preliminarily adjusted before the boot to ensure that the material is fully heated.
Through the above measures, the high temperature problem of organic fertilizer equipment in production can be effectively controlled to ensure the stable operation of equipment and the quality of products.
