To ensure the quality and safety of organic fertilizer crushers, the following key measures can be followed:
1. Equipment inspection: Before using the organic fertilizer crusher, it is necessary to conduct a comprehensive inspection of the equipment to ensure that the overall structure of the organic fertilizer equipment is complete, and there is no obvious damage, deformation or cracks, especially the crushing chamber, feed port and discharge port.
2. Crushing tool inspection: ensure that the crushing tool is firmly installed on the tool shaft, and the blade has no obvious notch, wear or loosening. For multi-layer tool structure, check the status of each layer of tools one by one.
3. Site cleaning: Clean the site around the crusher, ensure that the operation area is clean, free of debris, water and other obstacles. Remove tools and equipment that are not related to operation to prevent collision or interference during operation.
4. No-load start: Before starting the crusher, it must be started without load. During no-load operation, carefully observe the operating status of the equipment, check whether the rotation direction of the motor is correct, and whether the equipment has abnormal vibration, noise or other abnormal conditions.
5. Equipment condition monitoring: continuous monitoring of equipment operating parameters, such as motor current, voltage, temperature, etc. If the motor current is found to be too high, it may indicate that the equipment is overloaded and needs to reduce the feed amount or stop for inspection; If the motor temperature is too high, it may be caused by long-term operation, poor lubrication or poor heat dissipation, and corresponding measures should be taken.
Following the above measures can ensure the quality and safety of organic fertilizer shredders during use and reduce the risk of equipment failure and production accidents.
