The correct adjustment of the fermentation compost turning machine is very important to ensure the efficient operation of the organic fertilizer production line. Here are some basic steps and considerations:
1. Equipment inspection: Before starting, a thorough equipment inspection should be carried out to ensure that all components are intact, the connections are tight, the power cables and plugs are normal, and the filter is clean and properly installed.
2. Lubrication: According to the recommendations of equipment manufacturers, bearings, gears and other parts that need lubrication are lubricated to reduce friction and wear.
3. Operation training: Operators should receive appropriate training to understand the correct operation methods and safety procedures of organic fertilizer equipment.
4. Preparation before starting the equipment: Before starting the equipment, ensure that the working environment is safe and free of obstacles, and operate according to the instructions.
5. Trial run: Before the formal production, carry out no-load test run to check whether the steering of the equipment is correct and whether the gear noise is uniform.
6. Feeding operation: the fully mixed materials are transported to the front of the fermentation tank by forklift, and piled into a certain thickness.
7. Flipping operation: Before starting, idling for half a minute to see and listen to whether the equipment is running abnormally; This parameter can be used only when no exceptions exist.
8. Monitoring operation: During the operation of the equipment, the temperature, vibration and noise of the equipment are monitored to discover and solve problems in time.
9. Maintenance records: Establish maintenance and maintenance records of the equipment, record the time, content and result of each maintenance, and facilitate the tracking of equipment status.
10. Safe operation: comply with all safe operation procedures to ensure the safety of operators.
By following these steps, you can ensure the effective operation of the fermentation tiller, improve production efficiency, and at the same time ensure the safety of the operator.
