Cleaning the lubrication system of organic fertilizer equipment is an important link to ensure the normal operation of equipment and extend the service life. The following are the specific steps and precautions for cleaning the lubrication system:
1. Confirm the equipment status: Before cleaning, ensure that the equipment is in a safe working environment, cut off the power and hang up the warning sign "under maintenance, do not start". Depending on the type of equipment and the material of the lubrication system, choose the appropriate cleaner.
2. Starting equipment preheating: before discharging the old oil, start the equipment to run for a period of time, so that the lubricating oil reaches the working temperature, which helps to discharge the old oil. The old oil is completely discharged through the oil drain port of the equipment.
3. Cleaning lubrication system: For removable parts should be removed and cleaned separately. Clean with detergent or special cleaning agent, and dry with dry compressed air after cleaning. For corroded parts, chemical cleaning can be carried out first, and the rust can be removed and then rinsed with water.
4. Inspection and maintenance: After cleaning, check all parts of the lubrication system, such as oil pump, oil pipe, oil tank, etc., to ensure that there is no damage or blockage. If the parts are found to be damaged or seriously worn, replace them in time.
5. Reassembly and refueling: Reassemble the cleaned parts to the equipment, ensuring that all connections are well sealed. According to the requirements of the equipment, add appropriate amount of new lubricating oil.
6. Operation test: Restart the equipment to check whether the lubrication system works properly and ensure that there is no leakage.
Through the above steps, the lubrication system of organic fertilizer equipment can be effectively cleaned to ensure the normal operation and long-term stable use of organic fertilizer production lines.
