To check whether the drive belt of the organic fertilizer crusher is tightened properly, the following key points can be referred to:
Check the installation condition and position of the belt: Ensure that the belt is installed in the correct position, and the driving pulley, driven pulley and tensioning pulley should be on the same plane. Check if the belt has any damage, cracks or aging. If so, replace it in time.
2. Check the tension of the belt: The tension of the belt should be moderate. Under normal circumstances, when the distance between two wheels is about 1 meter, press the middle of the V-belt with your finger, and it should drop vertically by 10 to 20 millimeters. For V-belts, the initial tension can be controlled by applying a load perpendicular to the belt at the centers of the two tangential points of the belt and the pulley, thereby generating a specified deflection.
3. Adjust the tension of the belt: Make the adjustment through the tensioning wheel to ensure that the belt is neither too loose nor too tight. If it is too loose, it is prone to slippage and affect the transmission efficiency; if it is too tight, it will accelerate the wear of the belt and bearings. The tension of the newly installed belt should be frequently checked on the first day of use, as it takes some time for the elongation of the new belt to be fully released.
4. Maintenance and Cleaning: Regularly clear the debris between the belt and the pulley to ensure smooth operation of the belt. Regularly lubricate the pulley and related components to reduce wear.
Through the above steps, it can be ensured that the drive belt of the organic fertilizer crusher is tightened appropriately, thereby guaranteeing the efficient and stable operation of the organic fertilizer production line.
