1. Feed port design problem: If the feed port of the organic fertilizer crusher is not designed reasonably, the diagonal is not conducive to feeding, and the straight port expands the center of gravity of the feed, so that the material is fed faster, which may lead to the problem of not feeding.
2. Wet material problem: When encountering wet material, especially sticky material, crushing time is too long, wet material is easy to stick to the hammer head, rotor disc, and lining plate, thereby reducing the crushing chamber, not only reducing the output, but also the problem of not feeding.
3. The size of the discharge port problem: there are many types of organic fertilizer shredders, different yields, different models, so the discharge port design is different, if the design is disproportionate, it may lead to the problem of not feeding.
4. Equipment failure: The failure of the organic fertilizer production line will affect the normal work progress of the equipment, delay the production plan, and cause production loss. Possible causes include failure to maintain the basic state of organic fertilizer equipment, improper operation or inadequate maintenance, natural deterioration failure to repair in time, design and manufacturing defects.
5. Backward technology and equipment: Backward technology and equipment may also lead to low processing efficiency of organic fertilizer production lines, affecting the discharge of materials.
6. Human operation error: the operator may not operate in accordance with the operating procedures, or carry out destructive operations, resulting in no production line.
In view of the above reasons, the problem of organic fertilizer production line without material can be solved by improving equipment design, improving the technical level of operators, strengthening the maintenance of equipment, updating technical equipment and other measures.
